Price: [price_with_discount]
The basic kit does not include remote controls and it is USD35 per unit(as 220V no remote button or 110V no remote button); remote control is USD6 per unit. battery is not included in the remote control.
This board antenna of remote control is HCS301, SN1646, rolling code only, very exclusive of other remote controls; not working other remote controls!
And this board is only for 110V or 220V AC sliding gate motor, not for DC motor!
it is NOT working with swing gate opener motor,only for sliding gate motor;
Manual is NOT included in the package, and it will be sent by email only!
Important notes:
when purchasing this item, please make sure your motor is sliding gate motor; AC motor, not for DC motor; your motor must have limit switch and motor capacitor;
board size is 15.5*9.5cm;
This control board is desinged for sliding gate motors, power input 110V or 220V, frequency is 433.92MHz.
Keypad / single button interface.
Have Infrared safety sensor interface
Soft start and soft stop function and the soft stop width are adjustable
Working time is adjustable.
Motor output torque is adjustable.
User can select Auto-close function.
Each control board can learn 25 pieces of remote control.
Interface for single button / three button switch, infrared sensor, alarm light;
the board is updated as the following picture and please get noted:
VR1 is to adjust the motor operation time; to turn it in clockwise will increase the running time; in reverse, it will decrease the motor operation time; Max is 90seconds and minimum is 10 seconds;
VR2 is to adjust the force when the motor is going to stop; clockwise direction for increase the force and counter-clockwise is to decrease the force;
VR3 is to adjust the operation distance for soft stop; the adjustment is the same with the above;
VR4 is to change the motor torque; clockwise direction will increase the torque output and the reverse direction will decrease the torque.
the board we selling works with the motor as following pictures;
Compatible with this following board, an updated version:
