Price: [price_with_discount]
Product Description:
This miniature linear actuator is using for industrial, agricultural machinery, construction, clean sweeping vehicles, vessels, cargo and many other applications.
It can be replaced by hydraulic, pneumatic products ideal for saving energy consumption.
Technical Parameters:
Material: Aluminum alloy
Load capacity: 900N/225Lbs
Speed: 7mm/s
Rated speed: 3800RPM
Input Voltage: 12V DC
Duty cycle: 10%
Stroke Length:
50mm/2 inch 155*95*55mm
100mm/4 inch 205*95*55mm
150mm/6 inch 255*95*55mm
200mm/8 inch 305*95*55mm
250mm/10 inch 355*95*55mm
Technical Parameters:
Rated power: 20W, maximum 30W.
Ambient temperature -20°C to +75°C.
Standard protection class: IP54.
Low noise design, noise level less than 42dB.
Please do not disassemble the machine.
Product features: drive other objects to push, pull, rise, drop.
Product Applications: TV lift tables, massage beds, electric beds, medical chairs, electric equipment, micro-devices, electric sofas, camera frames, cameras and more.
Product Description:
Push bar Each side contains a travel limit switch. When the telescopic bar runs to the top or to the top, it will automatically disconnect the electricity.
The motor will not idle. Cut off the power, it can be stop at any position, with self-locking function.
The push rod is driven by a DC motor with a screw drive. The telescopic rod can only be retracted without rotation.
The motor is positive and negative. For example, if the positive electrode is stretched and the negative electrode is shrunk, the telescopic direction of the rod can be changed by changing it.
Installation size:
(1): The center distance between the two mounting holes before and after the push rod is fully retracted, the minimums mounting distance of the push rod
(that is, the length of the push rod itself).
Below 300mm stroke L (mounting dimensions) = 105mm + S (stroke)
300mm and 300mm above travel L (mounting dimensions)=147mm+S (stroke)
(2): Center distance between the two mounting holes before and after the push rod is fully extended.
(Below 300mm stroke) = 105mm + S (stroke) + S (stroke)
(300mm and 300mm strokes or more) = 147mm + S (stroke) + S (stroke).
