Price: [price_with_discount]
FW21 Pro is an ultra high-intensity outdoor and EDC flashlight. It adopts three Cree XHP50.2 LEDs and can reach up to 10,000 lumens of amazing output by using a single 21700 battery. The FW21 Pro inherits and uses the same firmware as FW3A, it defaulted with a ramping UI and there are also advance and rich mode settings for options. The electronic tail switch easily controls all the functions of the flashlight. Multifunctional, durable, and IP68 rated protection, FW21 Pro is a must-have for searching, hiking, camping, and an also EDC purpose.
1.Emitter: 3*Cree XHP50.2 LED
2.Optic: Aluminum alloy OP reflector
3.Lens: Glass with anti-reflective coating
4.Flux: ~10,000 lumens
5.Intensity: ~26,055cd ANSI throw ~325 m
6.Firmware: Free software called Andúril
7.User interfaces: [1] Defaulted SMOOTH RAMPING. Instant access to TURBO mode is also provided. [2] STEPPED RAMPING UI. [3] MOMENTARY mode. [4] MUGGLE mode. [5] Electronic LOCKOUT.
8.Other functions: Battery check, sunset, beacon, tactical strobe, party strobe, bike flasher, candlelight, lightning storm
9.Battery: One 18650 cell. An unprotected cell is recommended. Max. length 66mm. The cell is not included.
10.Driver: FET+7+1 driver. Low parasitic drain while OFF
11.Body: Copper with hard-coat anodizing
12.Switch: Electronic tail switch
13.Ingress rating: Equivalent to IPX8
14.Weight: Approximately 261g(Copper) without cells
15.Size: 40 mm head x 102 mm length x 28mm head
Package included
1*FW21 PRO Flashlight
1*User manual
1*Battery change note
2*Spare O-ring
Safety precautions
1.Use only a reputable 21700cells of known origin. Quality high drain cells
(over 10A)unprotected, flat top type cells, The supported maximum length
is 70.5 mm.
2.Use a reliable battery charger. Never over-charge or over-discharge cells.
3.Remove and recharge the cell when the low voltage indication is given by the
Lamp (repeated step-downs in lightlevel and eventual shutdown of the
light).
4.The extraordinary energy density that 21700cells offers also means that
hazardous conditions are created when a cell is short-circuited or
damaged. Always treat cells with respect and properly dispose of damaged
cells.
5.The FW21 Pro is a very high-intensity flashlight. Do not point directly at a
person, animal, moving vehicles or flammable materials.
6.When running at higher output levels the head of the Lamp will quickly heat.
This is normal. In warmer ambient conditions this temperature may
exceed 50’C depending on your settings, so please take the necessary
precautions when handling the Lamp.
