Price: [price_with_discount]
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Output and Runtime
-
Four brightness levels
-
-
XP-L HI V3
-
-
Led lumen: 4505/291/31/1
-
ANSI FL-1 lumen: 3155/206/22/0.5
-
-
XM-L2 U4
-
-
Led lumen: 5205/339/39/1
-
ANSI FL-1 lumen: 3755/242/28/0.5
-
-
XP-G2 S3
-
-
Led lumen: 4365/288/40/1
-
ANSI FL-1 lumen: 2915/192/27/0.5
-
-
Nichia 219 D220 (CRI-92)
-
-
Led lumen: 3005/194/26/1
-
ANSI FL-1 lumen: 2005/129/16/0.5
-
-
Moonlight setting is enabled for above output and runtime figure. With moonlight setting disabled, lowest output will increase by about 6 times and the second lowest output will be increased slightly as well.
-
-
Runtime
-
-
Runtime: 1.4/2.5/16/200+ hours
-
-
Seven hidden auxiliary outputs7
-
-
Strobe/Strobe(Var)/Flash(Hi)/S.O.S.(Fast)/S.O.S./Beacon/Flash(Lo)
-
Operations
-
Basic – Press on the switch button until it clicks to turn on the flashlight. Press the switch again until it clicks to switch off the light.
-
Access output groups 1 & 2 – Tight the head to access group 2 output. Loose the head to access group 1 output.
-
Switch between output level – With the flashlight on, slightly press the switch and release (within 1s) to switch to the next output.
-
Programmable Features – enable or disable moonlight output. Toggle this setting starting with head loosen, turn on the light, and then repeat tight and loose for three times. 2) Mode memory (D25A22 Clicky and D25A2 Clicky only) – remebers the last output in group 1. To toggle this setting, with head tighten, turn on the light, and repeat loose and tight for three times.
What's included
Stainless steel bezel w/ durable dark titanium coating
Spare o-rings
Titanium coated stainless steel pocket clip
User Manual
Rigid Nylon Holster w/ self-retention device and flip
Mil-Spec paracord lanyard w/ quick attachment clip
Pocket clip ring cover
