Price: [price_with_discount]
1. Shape: round
2. Material: NdFeB magnet + A3 steel + 304
stainless steel 3. Color: as in
the picture 4. Maximum vertical pulling force
D16mm: 1kg
D20mm: 1.5kg
D25mm: 2kg
D32 mm: 3.5 kg
D36 mm: 4.0 kg
D42mm: 5.5 kg
Note:
The magnetic pulling force was tested using a computer-based tensile tester. The actual thrust force will vary mainly depending on the following variables: steel thickness, thrust direction, pulling position, and so on. The vertical magnetic pulling force was obtained from a steel plate thickness of 10 mm.
Maximum operating temperature: 80 degrees Celsius
Characteristic:
Conventional neodymium magnets use only one side of their magnetic field to stick to the metal, which means they only use half of their available strength.
However, if you add a steel cup, the other pole of the magnet that is used, which increases the strength of the magnet to much higher than that of a conventional Neodymium Magnet, but also makes the other side magnetically weak.
If the highest possible traction force is required, then neodymium magnets on cups are the answer to your need for magnets.
In sunny weather, call your friends on a treasure hunt!
How wonderful it will be to enjoy the sunshine while enjoying the rescue from the water!
1. NdFeB magnets are sold by size, the unit of measurement is mm, please pay attention to the size.
2. Related electronic products, such as bank cards, mobile phones, pacemakers, etc., they are easily produced with NdFeB magnet, please keep a certain distance to avoid unnecessary losses.
3. NdFeB magnets are fragile, the characteristics are hard and brittle, especially large products, strips and thin slices, separate the magnet, please gently slide in a staggered manner, should not break the hard tray, so as not to damage the product or injure, separated to maintain a certain distance, not to touch the collision, product damage or even danger.
