Price: [price_with_discount]
M10 set Car Aluminum Alloy Dent Repair Puller Head Adapter Screw Tips for Slide Hammer and Pulling Tab M10/M12 and Glue Tabs
1.Can be used in all kinds of metal pit plane, such as cars, washing machines, refrigerators, etc
2.Suitable for the dent of all kinds of flat metal, such as the surface of automobile metal plate and the washing machine of metal plate
3.Quick and easy repair tool
4.Set Glue Puller Tabs Pad Paintless Dent Hail Repair Tool
5.Material: Plastic
How to use:
1) Clean the dent with a clean cloth.
2) Mount the glue stick into the glue gun and preheat for 5 minutes.
3) Chose a proper gasket. Large dent requires a large gasket. (Note: The larger the drawing gasket is, the larger the drawing force is).
4) Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue).
5) Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres, cooling for about 8 minutes. (The time should be less than 10 minutes and shorter slightly in winter).
6) Press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7) Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen.
8) Clean the repaired place with a clean wet cloth.
Package included: 18pcs x Puller Tabs (different style)
Note:
-
Please allow 1-10mm deviation due to manual measurement.
-
Due to light and screen difference, the item's color may be slightly different from the pictures.
