{"id":25017,"date":"2023-02-01T06:20:47","date_gmt":"2023-02-01T06:20:47","guid":{"rendered":"https:\/\/shoppingdealer.com\/?p=25017"},"modified":"2023-02-01T06:20:47","modified_gmt":"2023-02-01T06:20:47","slug":"universal-car-dent-pulling-repair-tools-auto-body-sheet-metal-paintless-uitdeukset-professional-mixed-size-tabs-hail-pit-remover","status":"publish","type":"post","link":"https:\/\/shoppingdealer.com\/?p=25017","title":{"rendered":"Universal Car Dent Pulling Repair Tools Auto Body Sheet Metal Paintless Uitdeukset Professional Mixed Size Tabs Hail Pit Remover"},"content":{"rendered":"


\nPrice: [price_with_discount]<\/span><\/p>\n

<\/a> <\/p>\n

\n
\n
<\/strong><\/span>Note:This product does not contain glue gun and glue stick, if you need, need to buy another.<\/strong><\/span>
\nPacking lncluded:<\/p>\n

Short Puller Kit<\/strong><\/span>
\n1x Short T Bar
\n18x Short Blue Tabs (6 Sizes)<\/strong><\/span><\/p>\n

44cm Puller Kit
\n20x Short Blue Tabs (5 Sizes)
\n1x 44cm T Bar Tools<\/p>\n

50cm Puller Kit
\n20x Short Blue Tabs (5 Sizes)
\n1x 50cm T Bar Tools<\/p>\n

6 Pcs
\n4 * Long Blue Tabs (2 Sizes)
\n2 * Holder  (2 Sizes)<\/strong><\/span>
\n 
\nDescription:
\nThis Paintless Dent Repair T-Bar puller is a lightweight glue tab pulling tool, meant to be used when repairing pressure dents and any dent that isn’t sharp or creased.
\nThe tension puller works well with a tap down hammer when pulling large dents.
\nIt’s very easy to control, everyone can removal the dent easily by yourself.<\/strong><\/span>
\n<\/span>
\nDescription:<\/strong>
\nThis Paintless Dent Repair T-Bar puller is a lightweight glue tab pulling tool, meant to be used when repairing pressure dents and any dent that isn’t sharp or creased.
\nThe tension puller works well with a tap down hammer when pulling large dents.
\nIt’s very easy to control, everyone can removal the dent easily by yourself.<\/p>\n

How to use: <\/strong>
\n1.Clean the dent with a clean wet cloth;
\n2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
\n3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the
\ndrawing gasket is, the larger the drawing force is); 4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
\n5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
\n6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
\n7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
\n8. Clean the repaired place with a clean wet cloth.<\/span><\/div>\n<\/div>\n

\n
\n
\n
<\/span><\/span><\/div>\n
\n

<\/div>\n<\/div>\n<\/div>\n

 <\/div>\n<\/div>\n
 <\/div>\n<\/div>\n

 <\/p>\n